Panasonic

NPM DX Modular Placement

Research Quality: 30% complete

Provisional entry — research in progress

This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.

Fig. — Manufacturer logo, not a photo of this toolWikimedia Commons (see file page for license)

Performance

±25 μm^[2]

Optics

NM-EJM8D^[1]

What it is

The Panasonic NPM DX is an electronic component mounting system and modular placement machine for surface-mount assembly.^[1]

The NPM DX uses the model designation NPM-DX and the model number NM-EJM8D.^[1]

How it works

The NPM DX uses a high-rigidity XY platform and high-speed vibration control, and the machine family supports lightweight 16-nozzle, lightweight 8-nozzle, 4-nozzle, and 3-nozzle heads.^[1]

The NPM DX includes automatic recovery functions, non-stop data modification, remote operation, and navigation functions for component supply and changeover assistance.^[1]

Where it fits in the process flow

The NPM DX accepts printed circuit boards with single-lane or dual-lane configurations, and the machine supports PCB exchange timing that depends on board length and conveyor selection.^[1]

What do the numbers mean?

Power & electrical1

Electric source: 3-phase AC 200, 220, 380, 400, 420, 480 V; 5.0 kVA^[1]

Optics & imaging1

Model No.: NM-EJM8D^[1]

Performance3

Placement accuracy, □12 mm: ±25 μm^[2]
Placement accuracy, □12 mm to □32 mm: ±40 μm^[2]
Placement accuracy, QFP: ±20 μm^[2]

Dimensions & facilities2

Dimensions: W 1,665 mm × D 2,570 mm × H 1,444 mm^[1]
Mass: 3,600 kg (only for main body)^[2]

Configuration & options7

Model ID: NPM-DX^[1]
Type: Electronic Component Mounting System / Modular Placement machine^[1]
Max PCB size, single-lane mode: L 50 × W 50 ～ L 510 × W 590 mm^[2]
Max PCB size, dual-lane mode: L 50 × W 50 ～ L 510 × W 300 mm^[2]
Placement speed: 92400 CPH^[2]
Max feeder capacity: 136 reels^[2]
Pneumatic source: Min. 0.5 MPa, 200 L/min (A.N.R.)^[1]

Interested in this tool?

Need help with this tool?Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

Electric source3-phase AC 200, 220, 380, 400, 420, 480 V; 5.0 kVA^[1]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Worked with this tool? Help preserve its knowledge →

Not publicly documented

The following facts about the NPM DX Modular Placement are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the NPM DX Modular Placement are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the NPM DX Modular Placement are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the NPM DX Modular Placement are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the NPM DX Modular Placement are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the NPM DX Modular Placement is not on record.
Answerable by: an OEM datasheet or a fab qualification report