Mitutoyo
BN 715 CMM
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Mitutoyo BN 715 is a coordinate measuring machine (CMM) with a measuring range of 60 inches by 28 inches by 24 inches. The BN 715 uses a Renishaw PH9/TP2 probing system and CMMC-3 controller.[1]
What it is
How it works
General reference — not yet source-verifiedA coordinate measuring machine operates by moving a probing tip along the X, Y, and Z axes to contact or scan the surface of a workpiece. The machine's bridge structure supports the horizontal X-axis beam, while a vertical ram carries the probe. The controller records the coordinates of each contact point, which are then processed by metrology software to construct a feature map or compare against design tolerances.
What do the numbers mean?
Control & software2
Dimensions & facilities1
Configuration & options2
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What is the measuring range of the Mitutoyo BN 715?
The measuring range of the BN 715 is 60 inches by 28 inches by 24 inches.[1]
What probing system does the BN 715 use?
The BN 715 is equipped with a Renishaw PH9/TP2 probing system.[1]
What controller type is used on the BN 715?
The controller type is a CMMC-3.[1]
What software does the BN 715 use?
The BN 715 uses CMM Manager software.[1]
Not publicly documented
The following facts about the BN 715 CMM are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the BN 715 CMM are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the BN 715 CMM are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the BN 715 CMM are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the BN 715 CMM are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the BN 715 CMM is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (2)Every fact above is drawn from these public sources
- [1]cmmproducts.com — cmmproducts.comcmmproducts.com
- [2]Inventory photo
Last updated Oct 5, 2026.
Compare with similar tools
View all →The KLA .204 PSL Wafer is an 8-inch NIST-traceable reference wafer compatible with Surfscan 6xy0 and Sp1 particle counters.
KLA .496 PSL Wafer is an 8-inch NIST traceable wafer stated to be capable on Surfscan 6xy0 and SP1.
The KLA .498 PSL Wafer is a NIST traceable reference wafer.
