Juki
Feeder Setup
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
The Juki Feeder Setup Station is a feeder staging and setup workstation for SMT assembly operations. The equipment is a Juki-branded station on locking casters.[1]
How it works
A feeder setup rack holds feeders in a controlled position during job changeover. The rack can be used to stage feeders for position-to-position exchange at the placement machine.[2]
The rack design can include electrostatic discharge protection and an adjustable configuration. The rack can also protect feeders from accidental damage during handling.[2]
Where it fits in the process flow
The rack supports changeover work for Juki 700 NF and FF feeders and Juki 2000 CTF feeders. The rack is intended for use during setup of feeder hardware rather than during board assembly itself.[2]
Applications
General reference — not yet source-verifiedThe equipment is used in SMT component feeder handling. The workstation is used for feeder staging, setup, and transfer to pick-and-place operations.
What do the numbers mean?
Configuration & options1
- on Locking Casters[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What feeder types does the rack support?
The rack supports Juki 700 NF and FF feeders and Juki 2000 CTF feeders.[2]
How many feeders does the rack hold?
The rack holds one feeder of any width.[2]
What handling purpose does the rack serve?
The rack is used for feeder setup, staging, and changeover work around pick-and-place machines.[2]
Not publicly documented
The following facts about the Feeder Setup are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
Fewer than 3 independently cited specifications for the Feeder Setup are on record; the remainder await public documentation.
Answerable by: an OEM datasheet, a cleanroom equipment inventory, or an engineer who operated or installed it
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Feeder Setup are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the Feeder Setup are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the Feeder Setup are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Feeder Setup are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (3)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]FEEDER SETUP RACK, JUKI 700 NF & FF, 2000, CF, CTF – U.S. Standard Industrial Workbenches, Safe Carts, Racks, Chairs & 1000s of Accessories | J&A Industries — jnaindustries.comjnaindustries.com
- [3]JUKI FX-1R ELECTRIC FEEDER SETUP STATION TYZ-EFSS factory and manufacturers | Ruihua — rhsmt.comrhsmt.com
Last updated Sep 28, 2026.
Compare with similar tools
View all →The Dek 03 iX Automatic is an automatic paste printer used in surface-mount technology assembly.
