Waferpedia

Heller

PCO 520

Thermal / DiffusionHeller PCO 520 family
Research Quality: 50% complete

Provisional entry — research in progress

This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.

The Heller PCO 520 is a pressure curing oven. The Heller PCO 520 uses forced convection heating and cooling in a rigid pressure chamber. The Heller PCO 520 has a typical capacity of 24 magazines.[1]

PCO 520 — Inventory photo
Fig. 01PCO 520Inventory photo[2]

Power

3 Phase[2]

Vacuum

Pressure curing oven[1]

What it is

The Heller PCO 520 is a pressure curing oven. The Heller PCO 520 is used for thermal processing in bonding and curing operations.[1][2]

How it works

The PCO 520 pressurizes air inside a rigid chamber and uses forced convection for heating and cooling. The chamber integrates heaters, heat exchangers, and blowers inside the pressure vessel.[1]

The PCO 520 automatically releases pressure to atmospheric pressure after the cycle completes. The PCO 520 accepts manual loading.[1]

Applications

The PCO 520 is used for die attach curing, underfill curing, wafer laminating, thermal compress bonding, via filling, and film and tape bonding.[1]

What do the numbers mean?

Power & electrical3

Phase
3 Phase[2]
Accurate?
Voltage
208-220 V[2]
Accurate?
Frequency
50-60 Hz[2]
Accurate?

Vacuum & pumping4

Equipment type
Pressure curing oven[1]
Accurate?
Operating pressure
1 – 10 bar[1]
Accurate?
Cooling water pressure
25 – 40 psi[1]
Accurate?
Max operating pressure
10 bar (145 psi)[1]
Accurate?

Configuration & options14

Largest Heater Load
20.7 A[2]
Accurate?
Short Circuit Interrupting Capacity
10K A[2]
Accurate?
Make
Heller[2]
Accurate?
Model
PCO 520[2]
Accurate?
Current
102 A[2]
Accurate?
Typical process time
120 min or per user spec[1]
Accurate?
Operating temperature
60°C – 200°C[1]
Accurate?
Max temperature
220°C[1]
Accurate?
Capacity
24 magazines (typical)[1]
Accurate?
Cooling method
PCW (17°C – 23°C)[1]
Accurate?
Oven size
2,200[L] x 1,700[W] x 1,700[H] mm[1]
Accurate?
Chamber usable area
716.5[L] x 608[W] x 440[H] mm[1]
Accurate?
Max operating temperature
200°C[1]
Accurate?
Loading type
Manual loading[1]
Accurate?

Observed configurations

How individual machines were equipped when they appeared on the secondary market — as listed, per unit. These describe one specific machine, not the model in general.

Unit as listed[2]

  • 208-220 V
  • 102 A
  • 3 Phase
  • 50-60 Hz
  • Largest Heater Load: 20.7 A
  • Short Circuit Interrupting Capacity: 10K A
Interested in this tool?
Need help with this tool?Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

  • Phase3 Phase[2]
  • Equipment typePressure curing oven[1]
  • Voltage208-220 V[2]
  • Frequency50-60 Hz[2]
  • Operating pressure1 – 10 bar[1]
  • Cooling water pressure25 – 40 psi[1]
  • Max operating pressure10 bar (145 psi)[1]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Worked with this tool? Help preserve its knowledge →

Frequently asked questions

What is the PCO 520 type of machine?

The PCO 520 is a pressure curing oven.[1]

How does the PCO 520 heat the load?

The PCO 520 uses forced convection for heating and cooling.[1]

Not publicly documented

The following facts about the PCO 520 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

  • No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the PCO 520 are on record.

    Answerable by: OEM historical records or a trade-press announcement

  • No publicly documented variants, configuration options, or revision breakpoints of the PCO 520 are on record.

    Answerable by: an OEM product catalog or an engineer who ordered or specified the tool

  • The control-system platform and OS era of the PCO 520 are not on record.

    Answerable by: an engineer who operated it or OEM installation records

  • No publicly documented failure modes or field errata for the PCO 520 are on record.

    Answerable by: a field service engineer, process engineer, or maintenance technician

  • The process node or technology generation of the PCO 520 is not on record.

    Answerable by: an OEM datasheet or a fab qualification report

No research found yet — worked with this tool? Share what you know.

Sources & citations

Sources (2)Every fact above is drawn from these public sources
  1. [1]sinerji-grup.com — sinerji-grup.comsinerji-grup.com
  2. [2]Inventory photo
Was this page accurate?

Last updated Oct 6, 2026.

Compare with similar tools

View all →