Fuji
NXT M 3
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
How it works
General reference — not yet source-verifiedA pick-and-place machine retrieves components from feeders or other supply formats, positions each component by machine vision and motion control, and places the component on a board at the programmed location. A modular placement platform divides the work across heads or modules so different component sizes and placement tasks can be handled within the same machine family.
Where it fits in the process flow
General reference — not yet source-verifiedThe Fuji NXT M 3 belongs in the SMT assembly flow after solder paste printing and before reflow soldering. The Fuji NXT M 3 places components onto prepared circuit boards for later solder attachment in the reflow process.
What do the numbers mean?
Power & electrical1
Performance2
- Placement accuracy
- H24G: +/-0.025 mm (Standard mode) / +/-0.038 mm (Productivity priority mode); V12/H12HS: +/-0.038 (+/-0.050) mm[1]
Dimensions & facilities8
Configuration & options18
- PCB size
- 48 x 48 mm to 250 x 510 mm (double conveyor); 48 x 48 mm to 250 x 610 mm (single conveyor)[1]
Vintage & configurations
Documented models & variants
| Designation | Generation | Vintage | Changes | Source |
|---|---|---|---|---|
| Fuji NXT M6 III | NXT III | — | Larger PCB size (up to 534x510 mm double conveyor, 534x610 mm single conveyor), supports up to 45 part types (8 mm tape), wider module width (645 mm vs 320 mm), and different placement head options. | flasonsmt.com[1] |
| NXT M3 III | NXT 3rd generation | 2015 | Described as part of the NXT III line with H24G head support for 008004" (0.25 x 0.125 mm) components. | flason-smt.com[2] |
| NXT M6 III | NXT 3rd generation | — | Described alongside NXT M3 III with larger PCB size support and wider module width. | flasonsmt.com[1] |
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- Power requirements3P/200V/10KVA[2]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What types of components can an SMT placement machine like the Fuji NXT M 3 handle?General reference — not yet source-verified
Machines of this class handle a wide range of surface-mount components, including tiny chip resistors and capacitors, small outline transistors, leaded ICs, ball-grid-array packages, and sometimes specialized components like connectors, shields, or edge-mounted parts, depending on the placement head and feeder configuration.
What kind of maintenance does this class of machine typically require?General reference — not yet source-verified
Routine maintenance includes cleaning and lubrication of linear guides and ball screws, periodic calibration of the placement head and vision system, inspection of vacuum nozzles for wear or blockage, and regular verification of feeder alignment. Preventive maintenance is usually performed at intervals set by the equipment maker.
Can these machines place components on flexible or irregularly shaped boards?General reference — not yet source-verified
Many SMT placement systems can handle flexible printed circuits and panels of unusual shape when equipped with appropriate PCB supports or tooling. However, because board handling relies on conveyor rails and clamping, very thin or soft materials may require dedicated carriers or special process tooling to maintain placement accuracy.
Not publicly documented
The following facts about the NXT M 3 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the NXT M 3 are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the NXT M 3 are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the NXT M 3 are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the NXT M 3 is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the NXT M 3 are on record.
Answerable by: an OEM parts catalog or a service engineer
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (3)Every fact above is drawn from these public sources
- [1]flasonsmt.com — flasonsmt.comflasonsmt.com
- [2]flason-smt.com — flason-smt.comflason-smt.com
- [3]Equipment inventory listing
Last updated Oct 9, 2026.
Compare with similar tools
View all →The Dek 03 iX Automatic is an automatic paste printer used in surface-mount technology assembly.
