Advantest
83000 F 330 T
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
The Advantest 83000 F 330 T is a tester classified in the Test & Probe category of semiconductor manufacturing equipment.[1][2][3]
The system bundles a mainframe with boards, a calibration matrix, a liquid cooling unit, DC power supplies, a device power supply master kit, a manipulator, a 512-pin testhead, and a workstation controller bundle.[1][2][3]
How it works
General reference — not yet source-verifiedA semiconductor tester applies electrical stimuli to a device under test and measures the device's responses against expected values.
The testhead carries the interface to the device under test, while the mainframe houses the electronics that generate test patterns and analyze results.
Where it fits in the process flow
General reference — not yet source-verifiedTest & Probe equipment is used after wafer fabrication to verify that individual devices on a wafer are electrically functional.
Applications
General reference — not yet source-verifiedTesters of this type are commonly used in wafer sort, final device test, and incoming inspection applications for digital and mixed-signal semiconductor devices.
What do the numbers mean?
Power & electrical1
- E 2770DA Mainframe Boards (32); E 2807A Calibration Matrix; E 2760D Liquid Cooling Unit; E 2784A DPS Master Kit, 4-Ch (2); E 2814A 512-Pin Manipulator; E 2810A Power Module Testhead 512; E 2812A 512-Pin Testhead, Rev. A; 6652 A DC Power Supplies (2); E 7038B WS Controller Bundle[1]
Configuration & options1
- E 2770DA Mainframe Boards (32)[1]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- ConfigurationE 2770DA Mainframe Boards (32); E 2807A Calibration Matrix; E 2760D Liquid Cooling Unit; E 2784A DPS Master Kit, 4-Ch (2); E 2814A 512-Pin Manipulator; E 2810A Power Module Testhead 512; E 2812A 512-Pin Testhead, Rev. A; 6652 A DC Power Supplies (2); E 7038B WS Controller Bundle[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What is the Advantest 83000 F 330 T?
The Advantest 83000 F 330 T is a tester classified in the Test & Probe category.[2][3]
What components make up the 83000 F 330 T system?
The system includes an E 2770DA mainframe with boards, an E 2807A calibration matrix, an E 2760D liquid cooling unit, an E 2784A DPS master kit for four channels, an E 2814A 512-pin manipulator, an E 2810A power module testhead with 512 pins, an E 2812A 512-pin testhead, 6652 A DC power supplies, and an E 7038B WS controller bundle.[1]
Does the 83000 F 330 T have a 512-pin testhead?
Yes, the system is equipped with an E 2812A 512-pin testhead and an E 2810A power module testhead with 512 pins.[1]
How is the 83000 F 330 T cooled?
The system includes an E 2760D liquid cooling unit.[1]
Not publicly documented
The following facts about the 83000 F 330 T are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
Fewer than 3 independently cited specifications for the 83000 F 330 T are on record; the remainder await public documentation.
Answerable by: an OEM datasheet, a cleanroom equipment inventory, or an engineer who operated or installed it
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 83000 F 330 T are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the 83000 F 330 T are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the 83000 F 330 T are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the 83000 F 330 T are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (3)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]Advantest 83000 F 330 T family | Waferpedia — waferpedia.comwaferpedia.com
- [3]83000 F 330 T — Advantest | Specs, Sourcing & Service | Waferpedia — waferpedia.comwaferpedia.com
Last updated Oct 11, 2026.
Compare with similar tools
View all →The KLA 1007 is a wafer prober manufactured by KLA.
The Electroglas 1034 Prober is a semiconductor wafer prober manufactured by Electroglas.
