Manufacturer
Looking for practical guidance on Leybold? The reference remains the primary source; requests are private, the network is growing, and a relevant match is not guaranteed.
45 entries
The THERMOVAC TM201 is a portable vacuum gauge listed by Leybold under its portable and mechanical vacuum gauging category.
The Leybold Heraeus Trivac D 16 A is a vacuum pump manufactured by Leybold Heraeus.
The PIEZOVAC PV201 is a Leybold portable vacuum gauge listed in the portable and mechanical vacuum gauging segment of the vacuum measurement and control product range.
The Leybold Turbovac 341 MCT is a turbo pump made by Leybold.
The Leybold Heraeus Membranovac 1 VS is a vacuum pressure controller with a listed power specification of 110V–240V AC, 50/60 Hz, 1.5 VA.
The Leybold Heraeus WA 250 is a vacuum booster pump with 3-phase, 60 Hz, 3450 RPM operation and a 143TC frame motor.
The Leybold Trivac D 4 A is a vacuum pump.
The Leybold TURBOVAC 50 is a compact turbomolecular vacuum pump with grease-lubricated bearings.
The Leybold CCS Box is a coater manufactured by Leybold.
Leybold WH 7000 is a vacuum pump specified as 11 kW and LVO 210.
The Leybold Turbo.Drive TD20 classic is an electronic frequency converter for driving specific turbomolecular pumps.
The Leybold Syrus Pro 1100 is a Physical Vapor Deposition (PVD) coater.
The Leybold Syrus C 1510 Optical is an optical coater categorized as precision optics.
The Leybold Syrus Pro 1510 is an evaporator described as a dual APS planetary system used with standard dielectric materials.
The Leybold Turbovac 1000 C is a turbomolecular vacuum pump with a pumping speed of 1000 L/s for N2.
The Leybold D 30 A is a vacuum pump.
The Leybold TRIVAC D 40 B is an oil-sealed, dual-stage rotary vane vacuum pump with nominal and effective pumping speeds of 46 m3/h and 40 m3/h, an ultimate total pressure below 2 x 10-3 mbar without gas ballast, and a water vapor capacity of 1184 g/h.
The Leybold Trivac D 16 A is a vacuum pump.
Leybold D 8 B is a vacuum pump with listed electrical options, a volume flow rate of 8 m3/h, and a pressure limit of 1x10^-4.
The Leybold Trivac D 16 A is a rotary vane pump.
The Leybold Trivac D 8 B is a two-stage, oil-sealed rotary vacuum pump with an ultimate pressure of ≤ 2 x 10-3 mbar (≤ 1.5 x 10-3 torr) and a pumping speed of 10.2 m³/h (6 cfm).
The Leybold Turbovac 150 Vacuum is a vacuum pump.
The Leybold Syrus Pro 710 Vacuum Coater is a vacuum coater with a 700 mm chamber inner diameter and a SYRUSpro control system.
Leybold Helios 800 is a sputter coater with a transfer module, three load lock modules, and integrated vacuum equipment.
Leybold Turbotronik NT 10 is an electronic frequency converter used to drive TURBOVAC 50 and 50D turbomolecular pumps.
Leybold Turbotronik NT 1000 / 1500 vH is a turbo vacuum pump controller.
Leybold Boxer Pro is a coater with an HPE 6 Eelectron gun, Mark II ion gun, and a substrate holder configuration with 3 segments on a calotte.
Leybold Boxer 700 AR Machine is a refurbished machine described with a turbo pump, gun, ion and thermal source, 2-way crystal head, Polycold, and 60 lens capacity per cycle.
Leybold Trivac D 25 BCS PFPE is a rotary vacuum pump.
The Leybold MAG W 2800 CT is a turbo pump designed for vacuum systems, operating at 480 Hz.
The Leybold IBS 1400 HT GT is a dual ion beam sputtering system with a 4-position target tower, KRI sputter and assist sources, an optical monitor, a planetary substrate carrier, test glasses, a ceramic plate substrate heater, and front and rear doors.
Leybold CCS pro AR is a coater described with 3-phase, 400 V AC, 50 Hz, 20 KVA power requirements and a listed set of included components.