Comparison ledger
JDSU 1205-1, Perkin Elmer Optima 8000 ICP-OES, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 1205-1JDSU | Optima 8000 ICP-OESPerkin Elmer |
|---|---|---|
| OEM | JDSU | Perkin Elmer |
| Category | Precision Optics | Precision Optics |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | JDSU 1205-1 | Perkin Elmer Optima |
| Cited variants | — | |
| Specifications | ||
| Manufacturer | JDSU[3] | — |
| Model | 1205-1[3] | — |
| Category | Fiber Optic Equipment[3] | — |
| Condition | Used[3] | — |
| Output Power | 0.5mW - 0.8mW[4] | — |
| Input Voltage | 115V[4] | — |
| Input Current | 0.12A[4] | — |
| Configuration | — | PolyScience WhisperCool Chiller[5] |
| Spectral Range | — | 165–900 nm[6] |
| Detection Limit | — | 5 µg/L (ppb) to 100 mg/L (ppm)[1] |
| Rf Generator Frequency | — | 40 MHz, free-running[2] |
| Power Output | — | 750 to 1500 watts, computer-controllable in 1 watt increments[2] |
| Output Power Stability | — | <0.1%[2] |
| Operating Temperature | — | 15–35°C (59–95°F), max rate of change 2.8°C (5°F) per hour[2] |
| Optimum Room Temperature | — | 20°C ±2°C[2] |
| Relative Humidity | — | 20% to 80% without condensation; optimum 35%–50%[2] |
| Altitude | — | 0–2000 m (sea level to 6562 feet)[2] |
| Dimensions (W x D x H) | — | 52 x 32 x 30 inches (132 x 81 x 76 cm)[2] |
| Weight | — | 310 lbs (141 kg)[2] |
| Sample Volume Required | — | 2 mL for analysis[1] |
| Sample Introduction Volume (with Prep3) | — | 2 mL[1] |
Plan your fab
Building a Precision Optics process? Get a complete equipment list.
Open the fab equipment planner →