Comparison ledger
Applied Materials 0720 06060 Part, Espec EHS-412MD, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 0720 06060 PartApplied Materials | EHS-412MDEspec |
|---|---|---|
| OEM | Applied Materials | Espec |
| Category | Test & Probe | Test & Probe |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Applied Materials 0720 06060 Part | Espec EHS-412MD |
| Cited variants | — | |
| Specifications | ||
| Configuration | Contact Pin 24-20 Awg Crimp Gold Flash[2] | — |
| Category | — | Highly accelerated stress test system[1] |
| Temperature range | — | +105.0°C to +162.2°C[1] |
| Humidity range | — | 75%rh to 100%rh[1] |
| Pressure range | — | 0.019 to 0.389 MPa (gauge)[1] |
| Interior dimensions | — | φ294×L318 mm ×2stage[1] |
| Model | — | EHS-412MD[1] |
| Type | — | Highly Accelerated Stress Test (HAST) chamber[3] |
| Interior volume | — | 21 liters x 2[4] |
| Test area dimensions | — | ø394 x D426(404) mm[4] |
| Power supply | — | 208V (±5% w/grounded neutral) 1ph 60Hz, 30 service amps (25 FLA)[3] |
| Control mode | — | Unsaturated or saturated humidity control; multi-mode 'M' system controls humidity via wet bulb/dry bulb during heat-up and cool-down[3] |
| Compliance | — | Fully conforms to EIA/JEDEC test method A110 & 102C[3] |
| Controller | — | Touch-screen controller with temperature, humidity, and count-down display[3] |
| Connectivity | — | Ethernet interface for remote access, data downloads, and email alerts[3] |
| Shelves | — | Two stainless steel shelves[3] |
| Safety features | — | Overheat and over-pressure protectors; door lock safety mechanism[3] |
| Exterior dimensions | — | 760 x 1000 x 1796 mm[3] |
| Power | — | 208V (±5% w/grounded neutral) 1ph 60Hz, 30 service amps (25 FLA)[3] |
| Features | — | Unsaturated or saturated humidity control; multi-mode M system; touch-screen controller; Ethernet interface; specimen power terminals[3] |
Plan your fab
Building a Test & Probe process? Get a complete equipment list.
Open the fab equipment planner →