Comparison ledger
Branson 101-149-053 Gold Booster, SUSS MicroTec SB 6, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 101-149-053 Gold BoosterBranson | SB 6SUSS MicroTec |
|---|---|---|
| OEM | Branson | SUSS MicroTec |
| Category | Packaging & Bonding | Packaging & Bonding |
| Wafer size | — | Wafer bonding at pressures 5e-5 to 3e-3 Torr and 50*C to 550*C |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Branson 101-149-053 Gold Booster | SUSS MicroTec SB 6 |
| Cited variants | — | |
| Specifications | ||
| Configuration | 1:1.5[3] | Pneumatic Block replaced with a SMC Solenoid Block[6] |
| Manufacturer | Branson[4] | — |
| Model | 101-149-053[4] | — |
| Type | Gold Booster[4] | — |
| Operating frequency | 20 kHz[5] | — |
| Gain | 1:1.5[4] | — |
| Mounting thread | 1/2-20[5] | — |
| Length | 5.4 in[5] | — |
| Gain ratio | 1:1.5[4] | — |
| Wafer size | — | Wafer bonding at pressures 5e-5 to 3e-3 Torr and 50*C to 550*C[6] |
| Temperature range | — | 50°C to 550°C[7] |
| Vacuum pressure | — | 5e-5 to 3e-3 Torr[6] |
| Base pressure | — | <5x10^-5 mbar[1] |
| Process pressure range (source 3) | — | 5e-5 to 3e3 mBar[7] |
| Maximum force | — | 20 kN[7] |
| Anodic bonding voltage | — | up to 2000 V[7] |
| Temperature accuracy | — | +/- 5 degrees[7] |
| Temperature uniformity | — | +/- 3%[7] |
| Heating | — | Upper and lower heating[7] |
| Control system | — | Windows-based computer control[7] |
| Bond head size | — | 150 mm[1] |
| Substrate sizes supported | — | 100 mm wafers, 3 inch wafers, small pieces[1] |
| Compatible bonding processes | — | Adhesive, Anodic, Eutectic, Fusion, Glass frit, Thermal compression[1] |
| Wafer Size | — | 6 inch (150 mm)[6] |
| Bonding Pressure Range | — | 5e-5 to 3e-3 Torr[6] |
| Achievable Chamber Pressure | — | < 5x10^-5 mbar[1] |
| Supported Bonding Processes | — | Adhesive, Anodic, Eutectic, Fusion, Glass frit[1] |
Plan your fab
Building a Packaging & Bonding process? Get a complete equipment list.
Open the fab equipment planner →