Comparison ledger
Applied Materials 0010-18024 Pyrometer Assembly, Koh Young KY 8080 SPI, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 0010-18024 Pyrometer AssemblyApplied Materials | KY 8080 SPIKoh Young |
|---|---|---|
| OEM | Applied Materials | Koh Young |
| Category | Metrology & Inspection | Metrology & Inspection |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Applied Materials 0010-18024 Pyrometer Assembly | Koh Young KY 8080 SPI |
| Specifications | ||
| Configuration | Capable of working on Applied Materials Radiance[1] | — |
| Min component | — | 01005[2] |
| PCB size | — | 350x330 mm[2] |
| Dimensions | — | 1000x1335x1627 mm[2] |
| Weight | — | 600 kg[2] |
| Inspection principle | — | 3D Shadow Free Moiré Camera Technology[2] |
| Camera resolution | — | 2 MPix[2] |
| XY pixel resolution | — | 20 µm (0.79 mils)[2] |
| Z resolution | — | 0.37 µm (0.015 mils)[2] |
| Inspection speed (Shadow Free Mode) | — | 15.0 cm²/sec (2.33 sq. inch/sec at 20 µm)[2] |
| Inspection speed (High Speed Mode) | — | 19.7 cm²/sec (3.05 sq. inch/sec)[2] |
| Volume repeatability (calibration target) | — | < 1% at 3 sigma[2] |
| Volume repeatability (on PCB) | — | < 3% at 3 sigma[2] |
| Height accuracy | — | 2 mm[2] |
| Gage R&R | — | < 10% at 6 sigma (±50 tolerance)[2] |
| Max PCB warp | — | ±3.5 mm[2] |
| Max paste height | — | 400 µm (15.75 mils)[2] |
| Min paste deposit size (rectangle at 20 µm) | — | 150 µm (5.91 mils)[2] |
| Min paste deposit size (circle) | — | 200 µm (7.87 mils)[2] |
| Distance between paste deposits | — | 100 mm (at 150 mm paste height) / 3.94 mils (at 5.91 mils paste height)[2] |
| Conveyor width adjustment | — | Automatic[2] |
| Conveyor fix type | — | Front/Rear Fixed (Factory Setting)[2] |
| Conveyor height | — | 970 ~ 870 mm (38.19 ~ 34.25 inch)[2] |
| Electrical supply | — | 200 ~ 240 VAC, 50/60 Hz, Single phase[2] |
| Air supply | — | 5 Kgf/cm²[2] |
| Operating system | — | Windows XP Professional[2] |
| SPC tool | — | SPC Plus[2] |
| Programming data import | — | GERBER (274X, 274D)[2] |
Plan your fab
Building a Metrology & Inspection process? Get a complete equipment list.
Open the fab equipment planner →