Comparison ledger
Agilent E 4402 B Spectrum Analyzer, Applied Materials 0010-21246 Part, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | E 4402 B Spectrum AnalyzerAgilent | 0010-21246 PartApplied Materials |
|---|---|---|
| OEM | Agilent | Applied Materials |
| Category | — | — |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Agilent E 4402 B Spectrum Analyzer | — |
| Specifications | ||
| Frequency Range | 9 kHz to 3 GHz[1] | — |
| Amplitude Accuracy | ±0.4 dB[1] | — |
| Phase Noise (10 kHz offset) | -101 dBc/Hz (typical)[1] | — |
| Phase Noise (100 kHz offset) | -122 dBc/Hz (typical)[1] | — |
| Phase Noise (1 MHz offset) | -136 dBc/Hz (typical)[1] | — |
| DANL (10 MHz to 1 GHz) | -152 dBm (typical)[1] | — |
| Input Attenuator Range | 0 to 75 dB, 5 dB steps[1] | — |
| Maximum Safe Input (CW) | +30 dBm[1] | — |
| Weight | 15.5 kg (34.2 lbs)[1] | — |
| Dimensions (W x H x D) | 416 mm x 222 mm x 409 mm[1] | — |
| Operating Temperature | 0 °C to +55 °C[1] | — |
| Power Consumption | <300 W[1] | — |
| Frequency range | 9 kHz to 3.0 GHz[1] | — |
| Warm up time | 5 minutes[1] | — |
| Third order intermodulation distortion | +16 dBm typical[1] | — |
| Sensitivity | -166 dBm[1] | — |
| Phase noise (10 kHz offset) | -101 dBc/Hz[1] | — |
| Phase noise (100 kHz offset) | -122 dBc/Hz[1] | — |
| Phase noise (1 MHz offset) | -136 dBc/Hz[1] | — |
| Display resolution | 640 x 480[1] | — |
| Operating temperature range | 0 °C to +55 °C[1] | — |